通用检测仪GM MDI GDS别克/雪佛兰/凯迪拉克/包安装编程/提供账号

(咨询特价)年最新通用MDI诊断检测仪

支持老款及新款雪佛兰.别克.凯迪拉克所有车型

凡是在本店购买此款产品的朋友会享受软件和硬件终生免费升级服务,在线免费远程安装软件 ,免费技术指导。

深4S店专家为你解决各种车的疑难杂症，如：进水车，事故车，匹配各种车的车身电脑，钥匙编程，发动电脑编程，变速箱，气囊电脑编程，低配升高配，定速巡航等

本款通用检测仪可刷隐藏功能和钥匙编程,提供刷多功能方向盘的详细指导是13年新君越2.0舒适。

提供在线编程,编程不成功不收费

原厂主板:

(咨询特价)14年 支持Pass-Thru 方式的维修编程

(咨询特价)14年  全部支持TISweb在线编程

   每台 GM MDI都使用原厂双层主板，硬件和软件与官网同步升级,主机终身保修，可提供通用GDS2，Tech2 Win所有诊断包，终生免费升级！全程在线编程,编程技术过硬,随时咨询,24小时专业指导免费安装,长期免费赠送高价值维修资料,安装和升级免费提供账号

新品上市:GM MDI 带WIFI 无线网卡功能.

通用最新检测仪MDI--是美国通用公司提供给通用特约维修站使用的第三代检测仪，2009年前后的通用的大部分车型，是通用汽车全球服务站必备产品.

MDI是美国ETAS公司针对GM装备有多路传输系统(4 GMLINE)的新车型提供电子故障诊断和维修编程的专用维修设备，该系统需配合PC机使用。目前只能检测部分GM新车型，老车型还需用TECH2进行检测。MDI可对所有GM车型进行编程，且编程速度比TECH-2有很大提高。

 MDI模块功能：

1.GDS2原厂软件，具有强大的和全面的检测功能，测试动力系统，车身和底盘

2.支持2009年后的所有通用车系，包括北美通用，上海通用，凯迪拉克，saab萨博,GMC,等车型

3.支持有线网络和USB连接

(咨询特价)00-2012年 支持Pass-Thru 方式的维修编程

(咨询特价)09年之后支持车辆诊断和在线编程

6.缩短维修编程时间,GMLAN通讯协议的ECU编程时间为目前使用Tech2的1/3

7.可以对新君威，新君袁科鲁兹，英朗,GL8 MPV车型节气门学习(08年-09的君越也可以进行节气门学习）

8.可以在线匹配新君威，新君袁科鲁兹，英朗车型钥匙（增加或是全丢都可以，不用拆解BCM）

9.可以对1999-2009年之间的大多车型在线编程。包括发动机，变速箱等电脑

10.下载软件包括 MDI Manager，GDS2,TECH2WIN,Quickstart全面

11.专业的售后团队，远程支持解答修车问题，使你没有受顾之忧

Multiple Diagnostic Interface

Description:

GM MDI (Multiple Diagnostic Interface) for wireless ECU reprogramming utilizing J2534. Hardware kit only.

The GM MDI is initially being introduced with Pass-Thruprogramming capabilities only. It can be used to perform

Pass-Thru programming on all vehicles built since 1993 and willsupport all vehicles into the future.The GM MDI will

be required to perform diagnostics onselected NAO vehicles for model year 2009. Diagnostic soft-ware is scheduled to

be released for the GM MDI during thefourth quarter of 2008.

When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data

duringa road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this

purpose. Regulations require programming procedures to be compliantwith SAE Recommended Practice J2534. The GM SPS

is com-pliant with SAE Recommended Practice J2534, and the GMMDI is compliant with the portions of SAE J2534 that

areapplicable for GM vehicles.

The Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models

when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles

fromprevious model years. Remote programming with the Tech 2 will continue to be supported for use on all 2007 and

previous vehicles.Additional information will be supplied in future.

Specifications

complete genuine GM MDI

Introduction of MDI

The GM MDI is a compact communication module that manages the transfer of data between a vehicle’s onboard

ECU network and a PC.The EL-47955 MDI is a kit of components:

A GM MDI
B J1962 Diagnostic connector
C USB cable
D Ethernet cable
E AC adapter/power supply
Wireless interface
AAA batteries
Owner manual

Operating software for the MDI will be downloaded from the TS2WEB website.

The GM MDI allows the user to perform Pass-Thru programming procedures using software running on a laptop or desktop PC.

What Protocols does the GM MDI Support@
For immediate use -- At present,vehicles have two buses on the 16 pin connector (high speed and low speed GMLAN).
The GM MDI communicates using all of the existing GM protocols, the same as the Tech2:
– UART
– Class 2
– KWP(咨询特价)
– GMLAN (CAN)
For future use -- Global architecture coming in July 2008 for MY 2009 will use a total of 4 GMLAN links. (This is
a limited rollout in MY 2009.) Global architecture adds a medium speed bus and an expansion bus. The Tech 2 and
CANdi module can run only low and high speed, and won’t work on the 4 GMLAN link system for diagnostics or programming. The MDI will have this capability.

How is the GM MDI Connected@
The GM MDI will be connected between the vehicle and the PC using the DLC and cable.Connection between the GM MDI and the PC can be accomplished several ways:

– Using the supplied cable to connect the mini USB port on the GM MDI and the USB port on the PC
– Using a standard CAT5 cable toconnect the Ethernet port on the GM MDI and the Ethernet port on the PC
– Using the WLAN card built into the
GM MDI to communicate with the PC through the dealership’s wireless network.

How Will the GM MDI be Used@

The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform
Pass-Thru programming on all vehicles built since 1993 and will support all vehicles into the future.

The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008. When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data during a road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this purpose.

Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.

The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles from previous model years.
Remote programming with the Tech 2 will continue to be supported for use on all 2007 and previous vehicles.
 

Additional information will be supplied in future TechLink articles and dealer communications.

pport all vehicles into the future.The GM MDI will

be required to perform diagnostics onselected NAO vehicles for model year 2009. Diagnostic soft-ware is scheduled to

be released for the GM MDI during thefourth quarter of 2008.

When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data

duringa road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this

purpose. Regulations require programming procedures to be compliantwith SAE Recommended Practice J2534. The GM SPS

is com-pliant with SAE Recommended Practice J2534, and the GMMDI is compliant with the portions of SAE J2534 that

areapplicable for GM vehicles.

The Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models

when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles

fromprevious model years. Remote programming with the Tech 2 will continue to be supported for use on all 2007 and

previous vehicles.Additional information will be supplied in future.

Specifications

complete genuine GM MDI

Introduction of MDI

The GM MDI is a compact communication module that manages the transfer of data between a vehicle’s onboard

ECU network and a PC.The EL-47955 MDI is a kit of components:

A GM MDI
B J1962 Diagnostic connector
C USB cable
D Ethernet cable
E AC adapter/power supply
Wireless interface
AAA batteries
Owner manual
Operating software for the MDI will be downloaded from the TS2WEB website.
The GM MDI allows the user to perform Pass-Thru programming procedures using software running on a laptop or desktop PC.

What Protocols does the GM MDI Support@
For immediate use -- At present,vehicles have two buses on the 16 pin connector (high speed and low speed GMLAN).
The GM MDI communicates using all of the existing GM protocols, the same as the Tech2:
– UART
– Class 2
– KWP(咨询特价)
– GMLAN (CAN)
For future use -- Global architecture coming in July 2008 for MY 2009 will use a total of 4 GMLAN links. (This is
a limited rollout in MY 2009.) Global architecture adds a medium speed bus and an expansion bus. The Tech 2 and
CANdi module can run only low and high speed, and won’t work on the 4 GMLAN link system for diagnostics or programming. The MDI will have this capability.
How is the GM MDI Connected@
The GM MDI will be connected between the vehicle and the PC using the DLC and cable.Connection between the GM MDI and the PC can be accomplished several ways:
– Using the supplied cable to connect the mini USB port on the GM MDI and the USB port on the PC
– Using a standard CAT5 cable toconnect the Ethernet port on the GM MDI and the Ethernet port on the PC
– Using the WLAN card built into the
GM MDI to communicate with the PC through the dealership’s wireless network.

How Will the GM MDI be Used@
The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform
Pass-Thru programming on all vehicles built since 1993 and will support all vehicles into the future.
The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008. When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data during a road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this purpose.
Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.
The Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles from previous model years.
Remote programming with the Tech 2 will continue to be supported for use on all 2007 and previous vehicles.
Additional information will be supplied in future TechLink articles and dealer communications.